Publications Archive

Publications older than five years old are listed here, organised by publication year.

  • Christofidou, K.A., McAuliffe, T.P., Mignanelli, P.M., Stone, H.J., Jones, N.G., On the prediction and the formation of the sigma phase in CrMnCoFeNix high entropy alloys, (2019), Journal of Alloys and Compounds, 770, pp. 285-293. DOI: 10.1016/j.jallcom.2018.08.032
  • Pedrazzini, S., Rowlands, B.S., Turk, A., Parr, I.M.D., Hardy, M.C., Bagot, P.A.J., Moody, M.P., Galindo-Nava, E., Stone, H.J., Partitioning of Ti and Kinetic Growth Predictions on the Thermally Grown Chromia Scale of a Polycrystalline Nickel-Based Superalloy, (2019), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (7), pp. 3024-3029. DOI: 10.1007/s11661-019-05246-5
  • Goodfellow, A.J., Galindo-Nava, E.I., Schwalbe, C., Stone, H.J., The role of composition on the extent of individual strengthening mechanisms in polycrystalline Ni-based superalloys (2019) Materials and Design, 173, Article 107760. DOI: 10.1016/j.matdes.2019.107760
  • Wilson, A.S., Hardy, M.C., Stone, H.J., Comparison of experimental and predicted TCP solvus temperatures in Ni-base superalloys (2019), Journal of Alloys and Compounds, pp. 1046-1055. DOI: 10.1016/j.jallcom.2019.02.235
  • Owen, L.R., Stone, H.J., Playford, H.Y., The assessment of local lattice strains in alloys using total scattering, (2019), Acta Materialia, 170, pp. 38-49. DOI: 10.1016/j.actamat.2019.02.038
  • Conduit, B.D., Illston, T., Baker, S., Duggappa, D.V., Harding, S., Stone, H.J., Conduit, G.J., Probabilistic neural network identification of an alloy for direct laser deposition, (2019), Materials and Design, 168, Article 107644. DOI: 10.1016/j.matdes.2019.107644
  • Schwalbe, C., Jacques, A., Galindo-Nava, E., Jones, C.N., Rae, C.M.F., Cormier, J., In situ measurement of the precipitate volume fraction and interfacial lattice misfit during non-isothermal creep in the superalloy CMSX-4, (2019), Materials Science and Engineering A, 740-741, pp. 182-186. DOI: 10.1016/j.msea.2018.10.033
  • AJ Goodfellow, J Kelleher, NG Jones, D Dye, MC Hardy, HJ Stone, The effect of Mo on load partitioning and microstrain evolution during compression of a series of polycrystalline Ni-Based superalloys, (2019), Acta Materialia, 176, 318-329
  • EJ Pickering, KA Christofidou, HJ Stone, NG Jones, On the design and feasibility of tantalum-base superalloys, Journal of Alloys and Compounds 804, 314-321
  • ME Bloomfield, KA Christofidou, NG Jones, Effect of Co on the phase stability of CrMnFeCoxNi high entropy alloys following long-duration exposures at intermediate temperatures, Intermetallics 114, 106582
  • C Schwalbe, J Cormier, N Jones, E Galindo-Nava, X Devaux, A Jacques, C Rae, The Effects of thermal cycling on the creep performance of a single crystal alloy, The 10th Pacific Rim International Conference on Advanced Materials and Processing
  • AS Wilson, KA Christofidou, A Evans, MC Hardy, HJ Stone, Comparison of methods for quantification of topologically close-packed phases in Ni-based superalloys, Metallurgical and Materials Transactions A 50 (12), 5925-5934
  • Leon-Cazares FD, Schlutter R, Jackson T, Galindo-Nava E, Rae C, A multiscale study on the morphology and evolution of slip bands in a nickel-based superalloy during low cycle fatigue, Acta Materialia, 182
  • Leon-Cazares FD, Kienl, Rae C, Three-Dimensional Reconstruction of Planar Deformation Features from Single Electron Micrographs, Metallurgical and Materials Transactions A 51(3)
  • Schwalbe, C., Cormier, J., Jones, C.N., Galindo-Nava, E., Rae, C.M.F., Investigating the Dislocation-Driven Micro-mechanical Response Under Non-isothermal Creep Conditions in Single-Crystal Superalloys, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (9), pp. 3988-4002. DOI: 10.1007/s11661-018-4764-3
  • Cormier, J., Rae, C.M.F., Neumeier, S., Hardy, M.C., Reed, R.C., Foreword, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (9), p. 3763. DOI: 10.1007/s11661-018-4803-0
  • Smith, T.M., Esser, B.D., Good, B., Hooshmand, M.S., Viswanathan, G.B., Rae, C.M.F., Ghazisaeidi, M., McComb, D.W., Mills, M.J., Segregation and Phase Transformations Along Superlattice Intrinsic Stacking Faults in Ni-Based Superalloys, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (9), pp. 4186-4198. DOI: 10.1007/s11661-018-4701-5
  • Christofidou, K.A., Hardy, M.C., Li, H.-Y., Argyrakis, C., Kitaguchi, H., Jones, N.G., Mignanelli, P.M., Wilson, A.S., Messé, O.M.D.M., Pickering, E.J., Gilbert, R.J., Rae, C.M.F., Yu, S., Evans, A., Child, D., Bowen, P., Stone, H.J., On the Effect of Nb on the Microstructure and Properties of Next Generation Polycrystalline Powder Metallurgy Ni-Based Superalloys, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (9), pp. 3896-3907. DOI: 10.1007/s11661-018-4682-4
  • Kienl, C., Casanova, A., Messé, O.M.D.M., Argyrakis, C., Rae, C.M.F., Characterization of the initial stages of dynamic recrystallization in ATI 718plus®, (2018), Minerals, Metals and Materials Series, 2018-June, pp. 405-420. DOI: 10.1007/978-3-319-89480-5_25
  • Scervini, M., Rae, C., Page, R., Rudkin, M., Loveless, D., O'Dell, S., Towards an improved lifing methodology for thermocouple probes used in gas turbines, (2018), Proceedings of the ASME Turbo Expo, 6. DOI: 10.1115/GT2018-76221
  • Owen, L.R., Jones, N.G., Lattice distortions in high-entropy alloys, (2018),  Journal of Materials Research, 33 (19), pp. 2954-2969. DOI: 10.1557/jmr.2018.322
  • Connor, L.D., Mignanelli, P.M., Christofidou, K.A., Jones, N.G., Baker, A.R., Tang, C.C., Guérin, S., Stone, H.J., In situ study of sigma phase formation in Cr–Co–Ni ternary alloys at 800°C using the long duration experiment facility at Diamond Light Source, (2018), Journal of Synchrotron Radiation, 25 (5), pp. 1371-1378. DOI: 10.1107/S1600577518009475
  • Bennett, J.M., Pickering, E.J., Barnard, J.S., Rugg, D., Stone, H.J., Jones, N.G., Observation of a new B2 structured phase in Ti-15Mo (wt.%), (2018), Materials Characterization, 142, pp. 523-530. DOI: 10.1016/j.matchar.2018.06.017
  • Pang, E.L., Pickering, E.J., Baik, S.I., Seidman, D.N., Jones, N.G., The effect of zirconium on the omega phase in Ti-24Nb-[0–8]Zr (at.%) alloys, (2018), Acta Materialia, 153, pp. 62-70. DOI: 10.1016/j.actamat.2018.04.016
  • Goodfellow, A.J., Galindo-Nava, E.I., Christofidou, K.A., Jones, N.G., Boyer, C.D., Martin, T.L., Bagot, P.A.J., Hardy, M.C., Stone, H.J., The effect of phase chemistry on the extent of strengthening mechanisms in model Ni-Cr-Al-Ti-Mo based superalloys, (2018), Acta Materialia, 153, pp. 290-302. DOI: 10.1016/j.actamat.2018.04.064
  • Knowles, A.J., Jun, T.-S., Bhowmik, A., Jones, N.G., Britton, T.B., Giuliani, F., Stone, H.J., Dye, D., Data on a new beta titanium alloy system reinforced with superlattice intermetallic precipitates, (2018), Data in Brief, 17, pp. 863-869. DOI: 10.1016/j.dib.2018.01.086
  • Conduit, B.D., Jones, N.G., Stone, H.J., Conduit, G.J., Probabilistic design of a molybdenum-base alloy using a neural network, (2018), Scripta Materialia, 146, pp. 82-86. DOI: 10.1016/j.scriptamat.2017.11.008
  • Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J. On the Time-Temperature-Transformation Behaviour of a New Dual-Superlattice Nickel-Based Superalloy, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (3), pp. 699-707.  DOI: 10.1007/s11661-017-4355-8
  • Goodfellow, A.J., Galindo-Nava, E.I., Christofidou, K.A., Jones, N.G., Martin, T., Bagot, P.A.J., Boyer, C.D., Hardy, M.C., Stone, H.J. Gamma Prime Precipitate Evolution During Aging of a Model Nickel-Based Superalloy, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (3), pp. 718-728. DOI: 10.1007/s11661-017-4336-y
  • Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J. On the effect of alloying additions to the Ni-Cr-Al-Nb dual-superlattice gamma-gamma prime-gamma double prime superalloys, (2018), Minerals, Metals and Materials Series, 2018-June, pp. 679-690. DOI: 10.1007/978-3-319-89480-5_45
  • Christofidou, K.A., Pickering, E.J., Orsatti, P., Mignanelli, P.M., Slater, T.J.A., Stone, H.J., Jones, N.G., On the influence of Mn on the phase stability of the CrMnxFeCoNi high entropy alloys, (2018), Intermetallics, 92, pp. 84-92. DOI: 10.1016/j.intermet.2017.09.011
  • Pedrazzini, S., Child, D.J., Aarholt, T., Ball, C., Dowd, M., Girling, A., Cockings, H., Perkins, K., Hardy, M.C., Stone, H.J., Bagot, P.A.J., On the Effect of Environmental Exposure on Dwell Fatigue Performance of a Fine-Grained Nickel-Based Superalloy, (2018), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (9), pp. 3908-3922. DOI: 10.1007/s11661-018-4752-7
  • Messé, O.M.D.M., Muñoz-Moreno, R., Illston, T., Baker, S., Stone, H.J., Metastable carbides and their impact on recrystallisation in IN738LC processed by selective laser melting, (2018), Additive Manufacturing, 22, pp. 394-404. DOI: 10.1016/j.addma.2018.05.030
  • Coakley, J., Radecka, A., Dye, D., Bagot, P.A.J., Martin, T.L., Prosa, T.J., Chen, Y., Stone, H.J., Seidman, D.N., Isheim, D. Characterizing nanoscale precipitation in a titanium alloy by laser-assisted atom probe tomography, (2018), Materials Characterization, 141, pp. 129-138. DOI: 10.1016/j.matchar.2018.04.016
  • Knowles, A.J., Jun, T.-S., Bhowmik, A., Jones, N.G., Britton, T.B., Giuliani, F., Stone, H.J., Dye, D., Data on a new beta titanium alloy system reinforced with superlattice intermetallic precipitates, (2018), Data in Brief, 17, pp. 863-869. DOI: 10.1016/j.dib.2018.01.086
  • Pedrazzini, S., Kiseeva, E.S., Escoube, R., Gardner, H.M., Douglas, J.O., Radecka, A., Mignanelli, P.M., Hughes, G.M., Chapman, G., Edmondson, P.D., Stone, H.J., De Lille, D., Bagot, P.A.J., In-Service Oxidation and Microstructural Evolution of a Nickel Superalloy in a Formula 1 Car Exhaust, (2018), Oxidation of Metals, 89 (3-4), pp. 375-394. DOI: 10.1007/s11085-017-9792-7
  • Krakow, R., Bennett, R.J., Johnstone, D.N., Vukmanovic, Z., Solano-Alvarez, W., Lainé, S.J., Einsle, J.F., Midgley, P.A., Rae, C.M.F., Hielscher, R. On three-dimensional misorientation spaces, (2017), Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473. DOI: 10.1098/rspa.2017.0274
  • Mignanelli, P.M., Jones, N.G., Pickering, E.J., Messé, O.M.D.M., Rae, C.M.F., Hardy, M.C., Stone, H.J. Gamma-gamma prime-gamma double prime dual-superlattice superalloys, (2017), Scripta Materialia, 136, pp. 136-140. DOI: 10.1016/j.scriptamat.2017.04.029
  • Krakow, R., Johnstone, D.N., Eggeman, A.S., Hünert, D., Hardy, M.C., Rae, C.M.F., Midgley, P.A. On the crystallography and composition of topologically close-packed phases in ATI 718Plus®, (2017), Acta Materialia, 130, pp. 271-280. DOI: 10.1016/j.actamat.2017.03.038
  • Mathur, H.N., Panwisawas, C., Jones, C.N., Reed, R.C., Rae, C.M.F., Nucleation of recrystallisation in castings of single crystal Ni-based superalloys, (2017), Acta Materialia, 129, pp. 112-123. DOI: 10.1016/j.actamat.2017.02.058
  • Freund, L.P., Messé, O.M.D.M., Barnard, J.S., Göken, M., Neumeier, S., Rae, C.M.F., Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy, (2017), Acta Materialia, 123, pp. 295-304. DOI: 10.1016/j.actamat.2016.10.048
  • Whittaker, M., Harrison, W., Deen, C., Rae, C., Williams, S., Creep deformation by dislocation movement in waspaloy, (2017), Materials, 10 (1), article 61. DOI: 10.3390/ma10010061
  • Knowles, A.J., Bhowmik, A., Purkayastha, S., Jones, N.G., Giuliani, F., Clegg, W.J., Dye, D., Stone, H.J. Laves phase intermetallic matrix composite in situ toughened by ductile precipitates, (2017), Scripta Materialia, 140, pp. 59-62. DOI: 10.1016/j.scriptamat.2017.06.043
  • Knowles, A.J., Jun, T.-S., Bhowmik, A., Jones, N.G., Britton, T.B., Giuliani, F., Stone, H.J., Dye, D. A new beta titanium alloy system reinforced with superlattice intermetallic precipitates, (2017), Scripta Materialia, 140, pp. 71-75. DOI: 10.1016/j.scriptamat.2017.06.038
  • Conduit, B.D., Jones, N.G., Stone, H.J., Conduit, G.J. Design of a nickel-base superalloy using a neural network, (2017), Materials and Design, 131, pp. 358-365. DOI: 10.1016/j.matdes.2017.06.007
  • Knowles, A.J., Bhowmik, A., Purkayastha, S., Jones, N.G., Giuliani, F., Clegg, W.J., Dye, D., Stone, H.J. Data on a Laves phase intermetallic matrix composite in situ toughened by ductile precipitates, (2017), Data in Brief, 14, pp. 489-493. DOI: 10.1016/j.dib.2017.08.005
  • Knowles, A.J., Jones, N.G., Jones, C.N., Stone, H.J. Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C), (2017), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (9), pp. 4334-4341. DOI: 10.1007/s11661-017-4134-6
  • Llewelyn, S.C.H., Christofidou, K.A., Araullo-Peters, V.J., Jones, N.G., Hardy, M.C., Marquis, E.A., Stone, H.J. The effect of Ni:Co ratio on the elemental phase partitioning in γ-γ′ Ni-Co-Al-Ti-Cr alloys, (2017), Acta Materialia, 131, pp. 296-304. DOI: 10.1016/j.actamat.2017.03.067
  • Christofidou, K., Robinson, J., Mignanelli, P., Pickering, E., Jones, N., Stone, H. The effect of heat treatment on precipitation in the Cu-Ni-Al alloy Hiduron® 130, (2017), Materials Science and Engineering A, 692, pp. 192-198. DOI: 10.1016/j.msea.2017.03.069
  • Azeem, M.A., Jones, N.G., Raghunathan, S.L., Vorontsov, V.A., Dye, D. Functional stability of a ferromagnetic polycrystalline Ni2MnGa high temperature shape memory alloy, (2017), Scripta Materialia, 130, pp. 274-277. DOI: 10.1016/j.scriptamat.2016.12.012
  • D'Souza, N., Feitosa, L.M., West, G.D., Jones, N.G., Dong, H.B. Effects of solute trapping on solidification path in Ta-rich Ta-Al-Fe ternary alloys under rapid freezing, (2017),  Journal of Alloys and Compounds, 698, pp. 375-383. DOI: 10.1016/j.jallcom.2016.12.149
  • Owen, L.R., Pickering, E.J., Playford, H.Y., Stone, H.J., Tucker, M.G., Jones, N.G. An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy, (2017), Acta Materialia, 122, pp. 11-18. DOI: 10.1016/j.actamat.2016.09.032
  • Coakley, J., Lass, E.A., Ma, D., Frost, M., Stone, H.J., Seidman, D.N., Dunand, D.C. Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted gamma-prime microstructures, (2017), Acta Materialia, 136, pp. 118-125. DOI: 10.1016/j.actamat.2017.06.025
  • Owen, L.R., Playford, H.Y., Stone, H.J., Tucker, M.G. Analysis of short-range order in Cu3Au using X-ray pair distribution functions, (2017), Acta Materialia, 125, pp. 15-26. DOI: 10.1016/j.actamat.2016.11.048
  • Coakley, J., Isheim, D., Radecka, A., Dye, D., Stone, H.J., Seidman, D.N., Microstructural evolution in a superelastic metastable beta-Ti alloy, (2017), Scripta Materialia, 128, pp. 87-90. DOI: 10.1016/j.scriptamat.2016.09.035
  • Coakley, J., Lass, E.A., Ma, D., Frost, M., Seidman, D.N., Dunand, D.C., Stone, H.J., Rafting and elastoplastic deformation of superalloys studied by neutron diffraction, (2017), Scripta Materialia, 134, pp. 110-114. DOI: 10.1016/j.scriptamat.2017.03.007
  • Coakley, J., Ma, D., Frost, M., Dye, D., Seidman, D.N., Dunand, D.C., Stone, H.J., Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ′ microstructure, (2017), Acta Materialia, 135, pp. 77-87. DOI: 10.1016/j.actamat.2017.06.021
  • Christofidou, K.A., Jones, N.G., Pickering, E.J., Flacau, R., Hardy, M.C., Stone, H.J. “The microstructure and hardness of Ni-Co-Al-Ti-Cr quinary alloys”; (2016) Journal of Alloys and Compounds, 688, pp. 542-552. DOI: 10.1016/j.jallcom.2016.07.159
  • Knowles, A.J., Jones, N.G., Messé, O.M.D.M., Barnard, J.S., Jones, C.N., Stone, H.J. “Phase equilibria in the Fe-Mo-Ti ternary system at 1000 °C”; (2016) International Journal of Refractory Metals and Hard Materials, 60, pp. 160-168.  DOI: 10.1016/j.ijrmhm.2016.07.008
  • Muñoz-Moreno, R., Divya, V.D., Driver, S.L., Messé, O.M.D.M., Illston, T., Baker, S., Carpenter, M.A., Stone, H.J.; “Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting”; (2016) Materials Science and Engineering A, 674, pp. 529-539.  DOI: 10.1016/j.msea.2016.06.075
  • Owen, L.R., Playford, H.Y., Stone, H.J., Tucker, M.G.; “A new approach to the analysis of short-range order in alloys using total scattering”; (2016) Acta Materialia, 115, pp. 155-166. DOI: 10.1016/j.actamat.2016.05.031
  • Driver, S.L., Jones, N.G., Stone, H.J., Rugg, D., Carpenter, M.A.; “On the effect of hydrogen on the elastic moduli and acoustic loss behaviour of Ti-6Al-4V”; (2016) Philosophical Magazine, 96 (22), pp. 2311-2327.  DOI: 10.1080/14786435.2016.1198054
  • Christofidou, K.A., Jones, N.G., Hardy, M.C., Stone, H.J.; “The Oxidation Behaviour of Alloys Based on the Ni–Co–Al–Ti–Cr System”; (2016) Oxidation of Metals, 85 (3-4), pp. 443-458. DOI: 10.1007/s11085-015-9606-8
  • Jones, N.G., Izzo, R., Mignanelli, P.M., Christofidou, K.A., Stone, H.J.; “Phase evolution in an Al0.5CrFeCoNiCu High Entropy Alloy”; (2016) Intermetallics, 71, pp. 43-50.  DOI: 10.1016/j.intermet.2015.12.001
  • Divya, V.D., Muñoz-Moreno, R., Messé, O.M.D.M., Barnard, J.S., Baker, S., Illston, T., Stone, H.J.; “Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment”; (2016) Materials Characterization, 114, pp. 62-74. DOI: 10.1016/j.matchar.2016.02.004
  • Zenk, C.H., Bauer, A., Goik, P., Neumeier, S., Stone, H.J., Göken, M.; “Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys”; (2016) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp. 1-9.  DOI: 10.1007/s11661-016-3408-8
  • Fielding, L.C.D., Jones, N.G., Walsh, J., Van Boxel, S., Blackmur, M.S., Lee, P.D., Withers, P.J., Stone, H.J., Bhadeshia, H.K.D.H.; Synchrotron analysis of toughness anomalies in nanostructured bainite:; (2016) Acta Materialia, 105, pp. 52-58.  DOI: 10.1016/j.actamat.2015.11.029
  • Pang, H.T., D’Souza, N., Dong, H., Stone, H.J., Rae, C.M.F.; “Detailed Analysis of the Solution Heat Treatment of a Third-Generation Single-Crystal Nickel-Based Superalloy CMSX-10K®”; (2016) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (2), pp. 889-906.  DOI: 10.1007/s11661-015-3252-2
  • Pickering, E.J., Muñoz-Moreno, R., Stone, H.J., Jones, N.G.; “Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi”; (2016) Scripta Materialia, 113, pp. 106-109.  DOI: 10.1016/j.scriptamat.2015.10.025
  • Rossouw, D., Krakow, R., Saghi, Z., Yeoh, C.S.M., Burdet, P., Leary, R.K., De La Peña, F., Ducati, C., Rae, C.M.F., Midgley, P.A.; “Blind source separation aided characterization of the γ′ strengthening phase in an advanced nickel-based superalloy by spectroscopic 4D electron microscopy”; (2016) Acta Materialia, 107, pp. 229-238. DOI: 10.1016/j.actamat.2016.01.042
  • Galindo-Nava, E.I., Rae, C.M.F. “Microstructure-sensitive modelling of dislocation creep in polycrystalline FCC alloys: Orowan theory revisited”; (2016) Materials Science and Engineering A, 651, pp. 116-126. DOI: 10.1016/j.msea.2015.10.088
  • Weekes, H.E., Jones, N.G., Lindley, T.C., Dye, D.; “Hydride reorientation in Zircaloy-4 examined by in situ synchrotron X-ray diffraction”; (2016) Journal of Nuclear Materials, 478, pp. 32-41. DOI: 10.1016/j.jnucmat.2016.05.029
  • Swinburne, T.D., Glavicic, M.G., Rahman, K.M., Jones, N.G., Coakley, J., Eakins, D.E., White, T.G., Tong, V., Milathianaki, D., Williams, G.J., Rugg, D., Sutton, A.P., Dye, D. “Picosecond dynamics of a shock-driven displacive phase transformation in Zr”; (2016) Physical Review B - Condensed Matter and Materials Physics, 93 (14), art. no. 144119, . DOI: 10.1103/PhysRevB.93.144119
  • Pickering, E.J., Jones, N.G.; “High-entropy alloys: a critical assessment of their founding principles and future prospects”; (2016) International Materials Reviews, 61 (3), pp. 183-202. Cited 2 times. DOI: 10.1080/09506608.2016.1180020
  • Bhowmik, A., Dolbnya, I.P., Britton, T.B., Jones, N.G., Sernicola, G., Walter, C., Gille, P., Dye, D., Clegg, W.J., Giuliani, F.; “Using coupled micropillar compression and micro-Laue diffraction to investigate deformation mechanisms in a complex metallic alloy Al13Co4”; (2016) Applied Physics Letters, 108 (11), art. no. 111902, DOI: 10.1063/1.4944486
  • Huenert, D., Proebstle, M., Casanova, A., Schluetter, R., Krakow, R., Buescher, M., Randelzhofer, P., Evans, A., Loehnert, K., Witulski, T., Neumeier, S., Rae, C.; “ATI718Plus® - New Nickel Based Disc Alloy and its Capability”; (2016) In Superalloys 2016: Proceedings of the 13th International Symposium of Superalloys (pp. 781-792). John Wiley & Sons, Inc., DOI: 10.1002/9781119075646.ch84
  • E.J. Pickering, N.G. Jones, High-entropy alloys: a critical assessment of their founding principles and future prospects, International Materials Reviews. 61 (2016) 183–202. doi:10.1080/09506608.2016.1180020.
  • Pickering, E.J., Stone, H.J., Jones, N.G. “Fine-scale precipitation in the high-entropy alloy Al0.5CrFeCoNiCu”; (2015) Materials Science and Engineering A, 645, pp. 65-71. DOI: 10.1016/j.msea.2015.08.010
  • Galindo-Nava, E.I., Connor, L.D., Rae, C.M.F.; “On the prediction of the yield stress of unimodal and multimodal γ' Nickel-base superalloys”; (2015) Acta Materialia, 98, art. no. 12297, pp. 377-390. DOI: 10.1016/j.actamat.2015.07.048
  • Galindo-Nava, E.I., Rae, C.M.F. “Microstructure evolution during dynamic recrystallisation in polycrystalline nickel superalloys”; (2015) Materials Science and Engineering A, 636, pp. 434-445. DOI: 10.1016/j.msea.2015.03.121
  • Coakley, J., Vorontsov, V.A., Jones, N.G., Radecka, A., Bagot, P.A.J., Littrell, K.C., Heenan, R.K., Hu, F., Magyar, A.P., Bell, D.C., Dye, D.; “Precipitation processes in the Beta-Titanium alloy Ti-5Al-5Mo-5V-3Cr”; (2015) Journal of Alloys and Compounds, 646, art. no. 34520, pp. 946-953. DOI: 10.1016/j.jallcom.2015.05.251
  • Rahman, K.M., Jones, N.G., Dye, D.; “Micromechanics of twinning in a TWIP steel”; (2015) Materials Science and Engineering A, 635, pp. 133-142. DOI: 10.1016/j.msea.2015.03.082
  • Vorontsov, V.A., Jones, N.G., Rahman, K.M., Dye, D. “Superelastic load cycling of Gum Metal”; (2015) Acta Materialia, 88, pp. 323-333. DOI: 10.1016/j.actamat.2015.01.033
  • Coakley, J., Vorontsov, V.A., Littrell, K.C., Heenan, R.K., Ohnuma, M., Jones, N.G., Dye, D.; “Nanoprecipitation in a beta-titanium alloy”; (2015) Journal of Alloys and Compounds, 623, pp. 146-156. DOI: 10.1016/j.jallcom.2014.10.038
  • Bennett, R.J., Krakow, R., Eggeman, A.S., Jones, C.N., Murakami, H., Rae, C.M.F.; “On the oxidation behavior of titanium within coated nickel-based superalloys”; (2015) Acta Materialia, 92, pp. 278-289.
  • Viswanathan, G.B., Shi, R., Genc, A., Vorontsov, V.A., Kovarik, L., Rae, C.M.F., Mills, M.J.; “Segregation at stacking faults within the γ′ phase of two Ni-base superalloys following intermediate temperature creep”; (2015) Scripta Materialia, 94, pp. 5-8.
  • Mignanelli, P.M., Jones, N.G., Perkins, K.M., Hardy, M.C., Stone, H.J.; “Microstructural evolution of a delta containing nickel-base superalloy during heat treatment and isothermal forging”; (2015) Materials Science and Engineering A, 621, pp. 265-271.
  • Bhowmik, A., Neumeier, S., Rhode, S., Stone, H.J.; “Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy”; (2015) Intermetallics, 59, pp. 95-101.
  • Lainé S.J. and Knowles K.M.; “Deformation Twinning in Commercial Purity Titanium at Room Temperature”; (2015) Philosophical Magazine, 95, 2153–2166
  • Jones N.G., Christofidou K.A. Stone H.J., “Rapid precipitation in an Al0·5 CrFeCoNiCu high entropy alloy,” Mater. Sci. Technol., vol. 31, no. 10, p. 1743284715Y.000, 2015
  • Jones, N.G., Frezza, A., Stone, H.J.; Phase equilibria of an Al0.5CrFeCoNiCu high entropy alloy; (2014) Materials Science and Engineering A, 615, pp. 214-221.
  • Messé, O.M., Barnard, J.S., Pickering, E.J., Midgley, P.A., Rae, C.M.F.; On the precipitation of delta phase in ALLVAC® 718Plus; (2014) Philosophical Magazine, 94 (10), pp. 1132-1152.
  • Yan, H.-Y., Coakley, J., Vorontsov, V.A., Jones, N.G., Stone, H.J., Dye, D.; Alloying and the micromechanics of Co-Al-W-X quaternary alloys; (2014) Materials Science and Engineering A, 613, pp. 201-208.
  • Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J.; The influence of Al: Nb ratio on the microstructure and mechanical response of quaternary Ni-Cr-Al-Nb alloys; (2014) Materials Science and Engineering A, 612, pp. 179-186.
  • Messé, O.M.D.M., Stekovic, S., Hardy, M., Rae, C.M.F.; Investigation on fatigue crack interaction with grain orientation during TMF tests in Nickel-base superalloy; (2014) Advanced Materials Research, 891-892, pp. 1289-1294. 
  • Jones, N.G., Humphrey, C., Connor, L.D., Wilhelmsson, O., Hultman, L., Stone, H.J., Giuliani, F., Clegg, W.J.; On the relevance of kinking to reversible hysteresis in MAX phases; (2014) Acta Materialia, 69, pp. 149-161.
  • Messé, O.M.D.M., Lachambre, J., King, A., Buffière, J.Y., Rae, C.M.F.; Investigation of fatigue crack propagation in nickel superalloy using diffraction contrast tomography and phase contrast tomography; (2014) Advanced Materials Research, 891-892, pp. 923-928.
  • Bhowmik, A., Bennett, R.J., Monserrat, B., Conduit, G.J., Connor, L.D., Parker, J.E., Thompson, R.P., Jones, C.N., Stone, H.J.; Alloys based on Cr-Cr2Ta containing Si; (2014) Intermetallics, 48, pp. 62-70.
  • Casanova, A., Hardy, M., Rae, C.M.F.; Morphology and kinetics of grain boundary precipitation in alloy ATI 718Plus®; (2014) 8th International Symposium on Superalloy 718 and Derivatives 2014, pp. 573-586.
  • Bhowmik, A., Knowles, K.M., Stone, H.J.; Discontinuous precipitation of Co 3V in a complex Co-based alloy; (2014) Philosophical Magazine, 94 (8), pp. 752-763.
  • Connor, L.D., Stone, H.J., Collins, D.M., Preuss, M., Hardy, M.C., Rae, C.M.F.; The effect of cooling rate from solution on the lattice misfit during isothermal aging of a Ni-base superalloy; (2014) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (5), pp. 2436-2444.
  • Bhowmik, A., Neumeier, S., Barnard, J.S., Zenk, C.H., Göken, M., Rae, C.M.F., Stone, H.J.; Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures; (2014) Philosophical Magazine, 94 (34), pp. 3914-3944.
  • Messé, O.M.D.M., Stekovic, S., Hardy, M.C., Rae, C.M.F.; Characterization of Plastic Deformation Induced by Shot-Peening in a Ni-Base Superalloy; (2014) JOM, 66 (12), pp. 2502-2515.
  • Collins, D.M., Stone, H.J.; A modelling approach to yield strength optimisation in a nickel-base superalloy; (2014) International Journal of Plasticity, 54, pp. 96-112.
  • Deen, C., Whittaker, M.T., Harrison, W., Rae, C.M.F., Williams, S.J.; Relating fundamental creep mechanisms in Waspaloy to the Wilshire equations; (2014) MATEC Web of Conferences, 14, art. no. 15001.
  • Jones, N.G., Aveson, J.W., Bhowmik, A., Conduit, B.D., Stone, H.J.; On the entropic stabilisation of an Al0.5CrFeCoNiCu high entropy alloy; (2014) Intermetallics, 54, pp. 148-153.
  • Mathur, H.N., Jones, N., Rae, C.M.F.; A study on the effect of composition, and the mechanisms of recrystallisation in single crystal Ni-based superalloys; (2014) MATEC Web of Conferences, 14, art. no. 07003.
  • Zenk, C.H., Neumeier, S., Stone, H.J., Göken, M.; Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system; (2014) Intermetallics, 55, pp. 28-39.
  • Krakow, R., Hardy, M.C., Rae, C.M.F., Midgley, P.A.; High resolution orientation mapping of secondary phases in ATI 718Plus® alloy; (2014) MATEC Web of Conferences, 14, art. no. 11002.
  • Dye, D., Stone, H.J., Watson, M., Rogge, R.B.; Characterization of phase transformations and stresses during the welding of a ferritic mild steel; (2014) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (4), pp. 2038-2045.
  • Panwisawas, C., Mathur, H.N., Broomfield, R.W., Putman, D., Rae, C.M.F., Reed, R.C.; Prediction of recrystallisation in single crystal nickel-based superalloys during investment casting; (2014) MATEC Web of Conferences, 14, art. no. 12002.
  • Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J.; The effect of composition on the gamma prime distribution of Ni-Cr-Al-Nb alloys; (2014) 8th International Symposium on Superalloy 718 and Derivatives 2014, pp. 563-572.
  • Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., D'Souza, N., Stone, H.J.; Origins of misorientation defects in single crystal castings: A time resolved in situ synchrotron X-ray radiography study; (2014) MATEC Web of Conferences, 14, art. no. 05003.
  • Bensch, M., Konrad, C.H., Fleischmann, E., Rae, C.M.F., Glatzel, U.; Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX; (2013) Materials Science and Engineering A, 577, pp. 179-188.
  • Suzuki, A.S., Rae, C.M.F.; Comparison of microstructural evolution in Pt aluminised Ni based superalloys with and without Ru; (2013) Materials Science and Technology (United Kingdom), 29 (6), pp. 726-732.
  • Jones, N.G., Christofidou, K.A., Mignanelli, P.M., Minshull, J.P., Hardy, M.C., Stone, H.J.; Influence of elevated Co and Ti levels on polycrystalline powder processed Ni-base superalloy; (2014) Materials Science and Technology (United Kingdom), 30 (15), pp. 1853-1861.
  • Collins, D.M., Yan, L., Marquis, E.A., Connor, L.D., Ciardiello, J.J., Evans, A.D., Stone, H.J.; Lattice misfit during ageing of a polycrystalline nickel-base superalloy; (2013) Acta Materialia, 61 (20), pp. 7791-7804.
  • Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D., Rae, C.M.F., Reed, R.C.; Prediction of recrystallization in investment cast single-crystal superalloys; (2013) Acta Materialia, 61 (1), pp. 51-66.
  • Choda, V., Bhowmik, A., Edmonds, I.M., Jones, C.N., Stone, H.J.; A study of quaternary Cr-Cr2Ta alloys - Microstructure and mechanical properties; (2013) Materials Research Society Symposium Proceedings, 1516, pp. 275-281.
  • Bhowmik, A., Pang, H.T., Edmonds, I.M., Rae, C.M.F., Stone, H.J.; Effect of silicon additions on the high temperature oxidation behaviour of Cr-Cr 2Ta alloys;(2013) Intermetallics, 32, pp. 373-383. 
  • Aveson, J.W., Tennant, P.A., Foss, B.J., Shollock, B.A., Stone, H.J., D'Souza, N.; On the origin of sliver defects in single crystal investment castings; (2013) Acta Materialia, 61 (14), pp. 5162-5171.
  • Collins, D.M., Conduit, B.D., Stone, H.J., Hardy, M.C., Conduit, G.J., Mitchell, R.J.; Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy; (2013) Acta Materialia, 61 (9), pp. 3378-3391.
  • Bhowmik, A., Stone, H.J.; A study on the influence of Mo, Al and Si additions on the microstructure of annealed dual phase Cr-Ta alloys; (2013) Journal of Materials Science, 48 (8), pp. 3283-3293.
  • Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D.C., Withey, P., Warnken, N., Rae, C.M.F., Reed, R.C.; Prediction of plastic strain for recrystallisation during investment casting of single crystal superalloys; (2012) Proceedings of the International Symposium on Superalloys, pp. 547-556.
  • Pickering, E.J., Mathur, H., Bhowmik, A., Messé, O.M.D.M., Barnard, J.S., Hardy, M.C., Krakow, R., Loehnert, K., Stone, H.J., Rae, C.M.F.; Grain-boundary precipitation in Allvac 718Plus; (2012) Acta Materialia, 60 (6-7), pp. 2757-2769. 
  • Bensch, M., Fleischmann, E., Konrad, C.H., Fried, M., Rae, C.M.F., Glatzel, U.; Secondary creep of thin-walled specimens affected by oxidation; (2012) Proceedings of the International Symposium on Superalloys, pp. 387-394.
  • Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., Tandjaoui, A., Billia, B., Goodwin, K., Lafford, T.A., Baruchel, J., Stone, H.J., D'Souza, N.; Dendrite bending during directional solidification; (2012) Proceedings of the International Symposium on Superalloys, pp. 615-624.
  • Vorontsov, V.A., Kovarik, L., Mills, M.J., Rae, C.M.F.; High-resolution electron microscopy of dislocation ribbons in a CMSX-4 superalloy single crystal; (2012) Acta Materialia, 60 (12), pp. 4866-4878.
  • Croxall, S.A., Hardy, M.C., Stone, H.J., Midgley, P.A.; The microstructure of RR1000 nickel-base superalloy: The FIB-SEM dual-beam approach; (2012) 1st International Conference on 3D Materials Science 2012, 3DMS 2012, pp. 215-220.
  • Pang, H.T., Edmonds, I.M., Jones, C.N., Stone, H.J., Rae, C.M.F.; Effects of Y and La additions on the processing and properties of a second generation single crystal nickel-base superalloy CMSX-4®; (2012) Proceedings of the International Symposium on Superalloys, pp. 301-310.
  • Yan, H.-Y., Vorontsov, V.A., Coakley, J., Jones, N.G., Stone, H.J., Dye, D.; Quaternary alloying effects and the prospects for a new generation of Co-base superalloys; (2012) Proceedings of the International Symposium on Superalloys, pp. 705-714.
  • Bhowmik, A., Knowles, K.M., Stone, H.J.; Microstructural evolution and interfacial crystallography in Cr-Cr 2Ta; (2012) Intermetallics, 31, pp. 34-47.
  • Aveson, J.W., Reinhart, G., Billia, B., Nguyen-Thi, H., Mangelinck-Noël, N., Lafford, T.A., Vie, C.A., Baruchel, J., Stone, H.J.; Observation of the initiation and propagation of solidification cracks by means of in situ synchrotron X-ray radiography; (2012) IOP Conference Series: Materials Science and Engineering, 33 (1), art. no. 012040.
  • Bensch, M., Fleischmann, E., Konrad, C.H., Fried, M., Rae, C.M.F., Glatzel, U.; Secondary Creep of Thin-Walled Specimens Affected by Oxidation; (2012) Superalloys 2012, pp. 387-394.
  • Yan, H.-Y, Vorontsov, V.A., Coakley, J., Jones, N.G., Stone, H.J., Dye, D.; Quaternary Alloying Effects and the Prospects for a New Generation of Co-Base Superalloys; (2012) Superalloys 2012, pp. 705-714.
  • Pang, H.T., Edmonds, I.M., Jones, C.N., Stone, H.J., Rae, C.M.F.; Effects of Y and La Additions on the Processing and Properties of a Second Generation Single Crystal Nickel-Base Superalloy CMSX-4®; (2012) Superalloys 2012, pp. 301-310.
  • Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., Tandjaoui, A., Billia, B., Goodwin, K., Lafford, T.A., Baruchel, J., Stone, H.J., D'Souza, N.;Dendrite Bending during Directional Solidification; (2012) Superalloys 2012, pp. 615-624.
  • Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D.C., Withey, P., Warnken, N., Rae, C.M.F., Reed, R.C.; Prediction of Plastic Strain for Recrystallisation during Investment Casting of Single Crystal Superalloys; (2012) Superalloys 2012, pp. 547-556. 
  • Bhowmik, A., Stone, H.J.; Microstructure and mechanical properties of two-phase Cr-Cr2Ta alloys; (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (9), pp. 3283-3292.
  • Pang, H.T., Stone, H.J., Rae, C.M.F., Zhang, L., Hobbs, R.A.; Solution heat treatment optimization of fourth-generation single-crystal nickel-base superalloys; (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (9), pp. 3264-3282.
  • Bhowmik, A., Jones, C.N., Edmonds, I.M., Stone, H.J.; Effect of Mo, Al and Si on the microstructure and mechanical properties of Cr-Cr 2Ta based alloys; (2012) Journal of Alloys and Compounds, 530, pp. 169-177.
  • Vorontsov, V.A., Voskoboinikov, R.E., Rae, C.M.F.; Shearing of γ′ precipitates in Ni-base superalloys: A phase field study incorporating the effective γ-surface; (2012) Philosophical Magazine, 92 (5), pp. 608-634.  
  • Bhowmik, A., Pang, H.T., Neumeier, S., Stone, H.J., Edmonds, I.; Microstructure and oxidation resistance of Cr-Ta-Si alloys; (2011) Materials Research Society Symposium Proceedings, 1295, pp. 323-328.
  • Ang, J., Vorontsov, V.A., Hayward, C.L., Balakrishnan, G., Stone', H.J., Rae, C.M.F.; Quarternary and quinary additions to directionally-solidified X-X 3Si eutectics of chromium and vanadium; (2011) Materials Research Society Symposium Proceedings, 1295, pp. 391-396.
  • Minshull, J.P., Neumeier, S., Tucker, M.G., Stone, H.J.; A1-L12 structures in the Al-Co-Ni-Ti quaternary phase system; (2011) Advanced Materials Research, 278, pp. 399-404.
  • Vorontsov, V.A., Voskoboinikov, R.E., Rae, C.M.F.; Prediction of mechanical behaviour in Ni-base superalloys using the phase field model of dislocations (2011) Advanced Materials Research, 278, pp. 150-155.
  • Collins, D.M., Heenan, R.K., Stone, H.J.; Characterization of gamma prime (γ) precipitates in a polycrystalline nickel-base superalloy using small-angle neutron scattering; (2011) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (1), pp. 49-59.
  • Suzuki, A.S., Rae, C.M.F., Hobbs, R.A., Murakami, H.; Secondary reaction zone formations in pt-aluminised fourth generation ni-base single crystal superalloys; (2011) Advanced Materials Research, 278, pp. 78-83.
  • Pang, H.T., Hobbs, R.A., Stone, H.J., Rae, C.M.F.; A study of the effects of alloying additions on TCP phase formation in 4th generation nickel-base single-crystal super alloys; (2011) Advanced Materials Research, 278, pp. 54-59.
  • Neumeier, S., Ang, J., Hobbs, R.A., Rae, C.M.F., Stone, H.J.; Lattice misfit of high refractory ruthenium containing nickel-base superalloys; (2011) Advanced Materials 

Vorontsov, V.A., Rae, C.M.F., Shen, C., Wang, Y., Dye, D.; Shearing of γ́ precipitates by a(112) dislocation ribbons in Ni-base superalloys: A phase field approach; (2010) Acta Materialia, 58 (12), pp. 4110-4119.

  • Voskoboinikov, R.E., Rae, C.M.F.; A new γ-surface in {111} plane in L12 Ni3Al; (2009) IOP Conference Series: Materials Science and Engineering, 3, art. no. 012009.
  • Suzuki, A., Rae, C.M.F.; Secondary reaction zone formations in coated Ni-base single crystal superalloys; (2009) Journal of Physics: Conference Series, 165, art. no. 012002.
  • Pang, H.T., Dong, H.B., Beanland, R., Stone, H.J., Rae, C.M.F., Midgley, P.A., Brewster, G., D'Souza, N.; Microstructure and solidification sequence of the interdendritic region in a third generation single-crystal nickel-base superalloy;(2009) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40 (7), pp. 1660-1669.
  • Rae, C.M.F., Zhang, L.; Primary creep in single crystal superalloys: Some comments on effects of composition and microstructure; (2009) Materials Science and Technology, 25 (2), pp. 228-235.
  • Reed, R.C., Wu, R.T., Hook, M.S., Rae, C.M.F., Wing, R.G.; On oxidation behaviour of platinum aluminide coated nickel based superalloy CMSX-4; (2009) Materials Science and Technology, 25 (2), pp. 276-286. 
  • Tsuno, N., Kakehi, K., Rae, C.M.F., Hashizume, R.; Effect of ruthenium on creep strength of Ni-Base single-crystal superalloys at 750 °C and 750 MPa; (2009) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40 (2), pp. 269-272.
  • Dye, D., Coakley, J., Vorontsov, V.A., Stone, H.J., Rogge, R.B.; Elastic moduli and load partitioning in a single-crystal nickel superalloy; (2009) Scripta Materialia, 61 (2), pp. 109-112.
  • Tsuno, N., Shimabayashi, S., Kakehi, K., Rae, C.M.F., Reed, R.C.; Tension/compression asymmetry in yield and creep strengths of Ni-based superalloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 433-442.
  • Stapleton, A.M., Raghunathan, S.L., Bantounas, I., Stone, H.J., Lindley, T.C., Dye, D.; Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature; (2008) Acta Materialia, 56 (20), pp. 6186-6196.
  • Hobbs, R.A., Brewster, G.J., Rae, C.M.F., Tin, S.; Evaluation of ruthenium-bearing single crystal superalloys - A design of experiments; (2008) Proceedings of the International Symposium on Superalloys, pp. 171-180.
  • Suzuki, A., Rae, C.M.F., Yoshida, M., Matsubara, Y., Murakami, H.; Secondary reaction zones in coated 4th generation Ni-based blade alloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 777-786.
  • Tin, S., Zhang, L., Hobbs, R.A., Yeh, A.-C., Rae, C.M.F., Broomfield, B.; Linking the properties, processing and chemistry of advanced single crystal Ni-base superalloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 81-90.
  • Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; The effect of ruthenium on the intermediate to high temperature creep response of high refractory content single crystal nickel-base superalloys; (2008) Materials Science and Engineering A, 489 (1-2), pp. 65-76.
  • Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; TCP suppression in a ruthenium-bearing single-crsytal nickel-based superalloy; (2008) JOM, 60 (7), pp. 37-42.
  • Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; Mechanisms of topologically close-packed phase suppression in an experimental ruthenium-bearing single-crystal nickel-base superalloy at 1100 °C; (2008) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 39 A (5), pp. 1014-1025.
  • Pahlavanyali, S., Drew, G., Rayment, A., Rae, C.M.F.; Thermo-mechanical fatigue of a polycrystalline superalloy: The effect of phase angle on TMF life and failure; (2008) International Journal of Fatigue, 30 (2), pp. 330-338.
  • Pahlavanyali, S., Rayment, A., Roebuck, B., Drew, G., Rae, C.M.F.; Thermo-mechanical fatigue testing of superalloys using miniature specimens; (2008) International Journal of Fatigue, 30 (2), pp. 397-403.
  • Pahlavanyali, S., Drew, G., Rayment, A., Rae, C.M.F.; Oxidation assisted thermomechanical fatigue failure of polycrystalline superalloys; (2007) Materials Science and Technology, 23 (12), pp. 1454-1460.
  • Charles, C.M., Drew, G.A., Bagnall, S., Rae, C.M.F.; Dislocation deformation mechanisms during fatigue of the nickel-based superalloy CMSX-4; (2007) Materials Science Forum, 546-549 (PART 3), pp. 1211-1218. 
  • Suzuki, A., Wu, Y., Yamaguchi, A., Murakami, H., Rae, C.M.F.; Oxidation behavior of Pt-Ir modified aluminized coatings on Ni-base single crystal superalloy TMS-82+; (2007) Oxidation of Metals, 68 (1-2), pp. 53-64.
  • Reed, R.C., Cox, D.C., Rae, C.M.F.; Kinetics of rafting in a single crystal superalloy: Effects of residual microsegregation; (2007) Materials Science and Technology, 23 (8), pp. 893-902.
  • Hobbs, R.A., Karunaratne, M.S.A., Tin, S., Reed, R.C., Rae, C.M.F.; Uphill diffusion in ternary Ni-Re-Ru alloys at 1000 and 1100 °C; (2007) Materials Science and Engineering A, 460-461, pp. 587-594.
  • Rae, C.M.F., Reed, R.C.; Primary creep in single crystal superalloys: Origins, mechanisms and effects; (2007) Acta Materialia, 55 (3), pp. 1067-1081.
  • Reed, R.C., Cox, D.C., Rae, C.M.F.; Damage accumulation during creep deformation of a single crystal superalloy at 1150 °C; (2007) Materials Science and Engineering A, 448 (1-2), pp. 88-96. 
  • Hobbs, R.A., Tin, S., Rae, C.M.F.; A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys; (2005) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (10), pp. 2761-2773.
  • Rae, C.M.F., Hook, M.S., Reed, R.C.; The effect of TCP morphology on the development of aluminide coated superalloys; (2005) Materials Science and Engineering A, 396 (1-2), pp. 231-239. 
  • Mitchell, R.J., Rae, C.M.F., Tin, S.; Grain boundary transformations during isothermal exposure of powder metallurgy nickel base superalloys for turbine disc applications; (2005) Materials Science and Technology, 21 (1), pp. 125-132.
  • Hobbs, R.A., Tin, S., Rae, C.M.F., Broomfield, R.W., Humphreys, C.J.; Solidification characteristics of advanced nickel-base single crystal superalloys; (2004) Proceedings of the International Symposium on Superalloys, pp. 819-825.
  • Drew, G.L., Reed, R.C., Kakehi, K., Rae, C.M.F.; Single crystal superalloys: The transition from primary to secondary creep; (2004) Proceedings of the International Symposium on Superalloys, pp. 127-136.
  • Yeh, A.C., Rae, C.M.F., Tin, S.; High temperature creep of Ru-bearing Ni-base single crystal superalloys; (2004) Proceedings of the International Symposium on Superalloys, pp. 677-685.
  • Cox, D.C., Roebuck, B., Rae, C.M.F., Reed, R.C.; Recrystallisation of single crystal superalloy CMSX-4; (2003) Materials Science and Technology, 19 (4), pp. 440-446.
  • Hook, M.S., Rae, C.M.F., Reed, R.C.; On the compatibility of superalloy substrate composition with the application of low temperature high activity pack-cementation aluminide coatings; (2002) Advanced Materials and Processes for Gas Turbines, pp. 179-186. 
  • Karunaratne, M.S.A., Rae, C.M.F., Reed, R.C.; On the microstructural instability of an experimental nickel-based single-crystal superalloy; (2001) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 32 (10), pp. 2409-2421.
  • Dye, D., Stone, H.J., Reed, R.C.; Intergranular and interphase microstresses; (2001) Current Opinion in Solid State and Materials Science, 5 (1), pp. 31-37.
  • Dye, D., Stone, H.J., Reed, R.C.; A two phase elastic-plastic self-consistent model for the accumulation of microstrains in Waspaloy; (2001) Acta Materialia, 49 (7), pp. 1271-1283.
  • Rae, C.M.F., Reed, R.C.; The precipitation of topologically close-packed phases in rhenium-containing superalloys; (2001) Acta Materialia, 49 (19), pp. 4113-4125.
  • Rae, C.M.F., Matan, N., Reed, R.C.; The role of stacking fault shear in the primary creep of [001]-oriented single crystal superalloys at 750°C and 750 MPa; (2001) Materials Science and Engineering A, 300 (1-2), pp. 125-134.
  • Rae, C.M.F., Matan, N., Cox, D.C., Rist, M.A., Reed, R.C.; On the primary creep of CMSX-4 superalloy single crystals; (2000) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 31 (9), pp. 2219-2228.
  • Stone, H.J., Roberts, S.M., Reed, R.C.; A process model for the distortion induced by the electronbeam welding of a nickel-based superalloy; (2000) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 31 (9), pp. 2261-2273.
  • Reed, R.C., Matan, N., Cox, D.C., Rist, M.A., Rae, C.M.F.; Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature; (1999) Acta Materialia, 47 (12), pp. 3367-3381.
  • Matan, N., Cox, D.C., Rae, C.M.F., Reed, R.C.; On the kinetics of rafting in CMSX-4 superalloy single crystals; (1999) Acta Materialia, 47 (7), pp. 2031-2045.
  • Stone, H.J., Holden, T.M., Reed, R.C.; Determination of the plane specific elastic constants of Waspaloy using neutron diffraction; (1999) Scripta Materialia, 40 (3), pp. 353-358.
  • Stone, H.J., Holden, T.M., Reed, R.C.; On the generation of microstrains during the plastic deformation of Waspaloy; (1999) Acta Materialia, 47 (17), pp. 4435-4448.
  • Stone, H.J., Withers, P.J., Holden, T.M., Roberts, S.M., Reed, R.C.; Comparison of three different techniques for measuring the residual stresses in an electron beam-welded plate of WASPALOY; (1999) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 30 (7), pp. 1797-1808.
  • Matan, N., Cox, D.C., Carter, P., Rist, M.A., Rae, C.M.F., Reed, R.C.; Creep of CMSX-4 superalloy single crystals: Effects of misorientation and temperature; (1999) Acta Materialia, 47 (5), pp. 1549-1563.
  • Stone, H.J., Roberts, S.M., Withers, P.J., Reed, R.C., Holden, T.M.; The Development and Validation of a Model for the Electron Beam Welding of Aero-Engine Components; (1998) ASM Proceedings of the International Conference: Trends in Welding Research, pp. 955-960.
  • Reed, R.C., Stone, H.J., Roberts, S.M., Robinson, J.M.; The development and validation of a model for the electron beam welding of aero-engine components; (1997) Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 211 (6), pp. 421-428. 
Recent publications
2022-present
People
See the profiles of current group members